Question - Portable Blowtorch

[Bovine]

Why don't you just get a short length of rigid flue pipe and cut it to make up the gap between the stove and the liner. If you are using the rear flue outlet then there will be no problem attaching it because of the change in direction. Just make sure that all joints are pushed home and made up with fire cement. The flue must be sealed from the liner at the top, to prevent any downdraught pushing fumes into the space.

 

[dr.z]

Hi,the Oxyturbo 110 kit is quite a good buy.
It fits into a rucksack no probs!
If you ditch the carrier and sew in some pockets inside your coat,you can run the oxygen/fuel gas tubes down 1 of your sleeves.
Burns through most padlocks easily but the toughened ones may need some gentlee persuasion.The tip already fitted to lance is best.The other 4 are for MAPP gas or different mixes.Cuts 3mm mild plate but your oxygen will go very rapidly!Gas usage is roughly 4 oxygen bottles to 1 gas.but depends what you want to use it for.Hope this is of use

 

[dr.z]

But i only use it for welding. The coat is merely for keeping myself and the bottles warm!

 

[norfolkexplorer]

here you go, i use this one for my plumbing if that's any help... never had a problem with it Rothenberger Super Fire Torch & Map Pro Gas Cylinder | Screwfix.com